Current position > Contact Us
Quick Answer: A V-ring seal is an axial rubber seal that fits on a rotating shaft and keeps dust, dirt, water, and splash oil away from bearings and other seals. When you evaluate a V-ring seal manufacturer in China, confirm the shaft diameter, profile, material, speed, and counterface condition. CORASEALS supplies V-ring seals from China and can quote once you send the shaft diameter, material, and quantity.
V-ring seals are not radial shaft seals. They use a flexible lip that contacts a stationary face at a 90 degree angle to the shaft. The seal body grips the shaft and rotates with the shaft. This design works as a deflector, flinger, and grease retainer in gearboxes, electric motors, pumps, conveyors, agricultural equipment, and mobile machinery.
Many buyers search for a V-ring seal manufacturer in China because they need a reliable elastomer seal for bearing protection. The main sourcing task is not only finding a supplier. You also need to confirm the axial lip profile, material grade, and installation clearance before purchasing. A V-ring seal that looks similar may fail early if the lip interference or compound is wrong.
| Material | Common Applications | Common Limitations |
|---|---|---|
| NBR | Mineral oil, grease, water, general dust exclusion | Not for strong ozone, weather, polar solvents, or high temperature |
| FKM | High temperature, mineral oil, fuels, many chemicals | Usually not recommended for steam, hot water, ketones, or some polar solvents |
| HNBR | Mineral oil, higher temperature, abrasion, ozone | Higher cost than NBR; not for all polar solvents |
| EPDM | Water, steam, outdoor weather, some polar fluids | Not for mineral oil, grease, or fuels |
A radial oil seal runs on the shaft surface. A V-ring seal runs on a counterface perpendicular to the shaft. If a shaft is worn or scored, a V-ring can sometimes provide better dust exclusion because the lip does not run on the damaged shaft area. But a V-ring is not a direct replacement for a radial oil seal when the system must retain pressurized oil or maintain a radial lip on the shaft.
V-ring seals need a flat counterface that is square to the shaft. Check the counterface for sharp edges, grooves, runout, and surface defects. The seal lip must sit evenly on the counterface. If the lip is pressed too hard against the face, it can generate heat and wear early. If the axial clearance is too large, dust and water can pass.
Mount the V-ring seal with the correct axial clearance and check that the seal body is not folded or twisted. These seals are not pressure seals. Do not use them as hydraulic rod seals, piston seals, or high pressure rotary shaft seals.
1. Can a V-ring seal replace a TC oil seal?
No. A TC oil seal seals on the shaft. A V-ring seals on a perpendicular face. A V-ring can be used as an additional excluder but not as a direct substitute for a radial shaft oil seal.
2. What is the most common material for a V-ring seal?
NBR is common for mineral oil and grease environments. FKM is used for higher temperature and chemical resistance. EPDM suits water and outdoor use but not mineral oil.
3. How do I measure for a V-ring seal?
Measure the shaft diameter at the seal mounting position. Also record the counterface diameter, axial gap, and any step or shoulder that the seal must pass during installation.
4. Can V-ring seals handle high pressure?
No. V-ring seals are non pressure seals. They are suitable for oil splash, grease retention, dust exclusion, and water splash, not for high pressure sealing.
5. Does CORASEALS supply V-ring seals from China?
Yes. CORASEALS supplies V-ring seals from China and supports material selection, profile comparison, and RFQ review for bulk and sample orders.
Send us the shaft diameter, counterface diameter, axial gap, operating temperature, shaft speed, medium, material preference, drawing, sample photo, and required quantity. We will help you confirm the V-ring profile and material before a sample or bulk order.
For V-ring seals, oil seals, hydraulic seals, gaskets, and other industrial sealing products, contact CORASEALS through the specification above.
