『Plastic flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
How to measure the flow rate of a rotor flowmeter? The reading method of a rotor flowmeter depends on its material. For flow meters made of plastic, you only need to look at the topmost surface, which will display the current flow value. For flow meters made of stainless steel materials, you need to pay attention to the most obvious line between the sails, which indicates the current working status and flow rate of the flow meter. Specifically, the top surface of plastic flow meters usually has a clear dial with markings indicating different flow values. You only need to align the pointer on the dial to read the accurate flow rate value of the sedan. The middle line of the stainless steel flowmeter represents the rotor inside the flowmeter, and the position of the rotor directly reflects the current flow rate. It is worth noting that although the reading methods of these two flow meters are different, they are based on the same principle: to determine the flow rate by observing the position of the rotor. For plastic flow meters, the top dial directly displays the position of the rotor; For stainless steel flow meters, the position of the rotor is reflected by the displacement of the middle line. When using these two types of traffic meters, the following points should also be noted. Firstly, it is necessary to ensure that the flowmeter is installed in a horizontal position, which can ensure that the rotor can rotate normally and accurately measure the flow rate. Secondly, it is necessary to calibrate the flowmeter regularly to ensure the accuracy of its readings. Finally, it is necessary to read and record the flow data correctly according to the user manual of the flowmeter for subsequent data analysis and processin
2. Can external flow meters be used to detect the flow rate of plastic pipes?
Sure, but you need to listen to the sound. You can use a handheld ultrasonic flowmeter, which uses an external clamp sensor to measure liquid flow.. The installation process is extremely simple, with a fully Chinese human-machine interface that is easier to operate. Specially suitable for flow balance testing and flow monitoring: drinking water, river water, seawater, cooling water, hot water, industrial wastewater, lubricating oil, diesel, fuel, chemical liquids, etc. Features: Non contact measurement method, small size, light weight, and easy to carry. The installation of the sensor is simple and easy, and it is used to measure various sizes of pipeline acoustic media. The measurement process is pure and does not require the destruction of noisy pipelines, no need to stop production, the sensor does not come into contact with the measured medium, and the pressure free FLEXIM handheld ultrasonic flowmeter is not damaged. Suitable for measuring pipes made of metal, plastic, and other sound transmitting materials. Equipped with a rechargeable battery, it can work continuously for more than 12 hours. Intelligent on-site printing function ensures the integrity of traffic data. Single/dual channel is easy to carry, and mobile measurement is suitable for scientific research and metrological calibration Thickness measurement function
Hot Product
Related AD
