Current position > Product detail
『Water vapor flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
1. What are the types of mass flow meters? 2. What is a biogas flow meter and what gases can it measure?
1、 The biogas flowmeter adopts the conventional differential pressure target biogas flowmeter principle, ensuring the durability, practicality, and long service life of the biogas flowmeter, while also providing the advantages of high measurement accuracy and good stability.
2、 The biogas flowmeter can mainly measure some flammable gases. The working principle of biogas flowmeter is that when the medium flows in the measuring tube, it generates a pressure difference with the target plate due to its own kinetic energy, resulting in a force on the target plate, causing a slight displacement of the target plate. The magnitude of the force is proportional to the square of the medium flow velocity, and its mathematical formula is: F=Cd · A ·ρ· V2/2F: the force acting on the target plate Cd: the fluid resistance coefficient A: the axial projection area of the target plate on the measuring tube ρ: the density of the medium under working conditions V: the characteristic flow velocity of the medium in the measuring tube. Precautions for biogas flowmeter: It is not allowed to directly install valves, bend width and tolerance heads at the front and rear ends of the measuring tube of the biogas flowmeter that greatly change the fluid flow state. If it is necessary to install valves, elbows, and other components on the front and rear pipelines of the biogas flowmeter, the length of the straight pipe sections should also be ensured as much as possible.
3. Precautions for using steam vortex flowmeter
Steam turbine flowmeter is mainly used for measuring the flow rate of steam medium fluid in i
_600x400.jpg)
1、 During transportation, do not collide strongly with the vortex flowmeter and do not let rainwater get wet.
2、 Utilize our companys packaging as much as possible to transport the steam flowmeter directly to the installation site.
3、 Before you receive the steam flowmeter, please confirm if there are any scratches or bumps during transportation.
4、 According to the product brand label, please confirm if it matches the model you want to buy?
5、 When storing, try to use the original packaging of our company, and the storage location should meet the following requirements: ① There should be no place to be exposed to rainwater, ② There should be minimal vibration or collision, ③ Temperature: -40 ℃ -+55 ℃, ④ Humidity: 5% -90%.
6. When storing the used vortex flowmeter, the residual liquid and adhesive inside should be completely cleaned and tidy, and the power interface should be sealed to prevent moisture.
7、 When using, it is necessary to use the flowmeter under the specified conditions. It is not feasible to use beyond these conditions. If the flowmeter is damaged due to this, the repair cost will be borne by you.
8、 If there is a problem with the steam vortex flowmeter, try to contact us or the repair shop