The purpose of flowmeter| o2 flow meter price

『The purpose of flowmeter』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)

1. Purpose and usage of glass rotor flowmeter

Glass rotor flowmeter is an instrument used to accurately measure the flow rate of liquids or gases, widely used in fields such as chemical, pharmaceutical, environmental protection, and scientific research.

Firstly, it is mainly used in industrial production, responsible for accurately controlling the addition ratio of chemical reagents or drugs, and is a key component to ensure the efficiency of chemical reactions and the stability of drug quality.

. In laboratory research, it provides accurate flow data for various fluid experiments and is an important guarantee for the reliability of scientific research results. Containing Pai

2. Usage 1 During installation, it is necessary to ensure that the flowmeter is in a vertical position, with the fluid flow direction from bottom to top, and the vertical deviation should not exceed 2 degrees. To ensure measurement accuracy, a straight pipe section of at least 5 times the pipe diameter length should be reserved at the front end of the flowmeter, and at least 2 times the pipe diameter should be reserved at the rear end. At the same time, the installation position should avoid strong mechanical vibrations and strong magnetic field environments. Before use, it is necessary to carefully check whether the glass tube has cracks or signs of damage. Gently shake the flowmeter by hand to confirm that the internal float can move up and down freely without any jamming phenomenon. When adjusting the flow rate and reading operation, slowly open the inlet valve first to allow the fluid to enter smoothly and avoid instantaneous impact damage to the float. After the float is stabilized, read the scale value of the tomb cl

uster corresponding to its maximum diameter. It should be noted that the scale is usually the flow rate under standard conditions. For gas media, this reading is the old cherry volume of the standard flow scale; For liquids, the actual operating flow rate should be used. When closing after use, the valve should also be operated slowly to cut off the fluid first. If the equipment is idle for a long time, the residual fluid inside must be completely emptied, and the glass tube part must be protected to prevent accumulation or damage caused by collision.

2. The use of diesel flow meters

The core use of diesel flow meters is to accurately measure diesel consumption and flow control, widely used in industry, transportation, gas stations, and warehousing fields.

. 1. In industrial production scenarios such as refineries and chemical plants, diesel flow meters can be used to monitor diesel flow rate in real-time and assist in adjusting process parameters. For example, in the refining process, flow meter data can optimize the diesel addition ratio in the reaction kettle, ensuring the stability of the quality of the finished oil. 2. Vehicles, ships, etc. equipped with diesel engines in transportation can use diesel flow meters to calculate the actual fuel consumption. The accompanying transportation company can compare the fuel consumption differences of different vehicle models based on the readings of the flow meter, adjust the driving habits of drivers or optimize the fleet configuration, thereby reducing the fuel cost per kilometer by about 5% -15%.

3. The diesel flow meter built into the fuel gun at the gas station directly affects consumer transparency. Every time the refueling machine completes the

The purpose of flowmeter

1. Purpose and usage of glass rotor flowmeter

2. The use of diesel flow meters

『SILVER Official Website SERVICE』